Lenovo Miix 2-8 and Thinkpad 8 Bluetooth problems

for those who have the same problems like me while connecting a bluetooth keyboard and a bluetooth mouse at the same time and figuring out lags on the mouse here is a fix for this.

go to your device manager. under network adapters you will find a “broadcom 802.11abgn wireless sdio” adapter.

Screenshot (2)

at the setting in this adapter go to the rider advanced in the list choose “bluetooth collaboration”. further in the pull down menu go to disabled.

Screenshot (3)

voila now the keyboard and the mouse work like a charm without lags and hangs…

Lenovo Miix 2-8 and internal devices working

For all who are waiting for results: i got the Huawei E3331 modem working right now. I am still at the internal 3.3V sensor port with the power source. So what did the hack? I ordered a new step-up regulator to power the device. the new one is called U3V12F5 and has a high power transistor on board. With this there is enough current to power high consumption usb stick without any problems. Measurements are about 12x6x3mm and with this it is possible to hide everything under the backcover including the Huawei modem. The Lenovo is powering up without any problems after this there is the usb modem found by windows and you can connect to the service provider without any problems. I made a test to surf around 10 minutes only with the modem activated and everything getting really smooth. So tomorrow there should be a new device arriving here. I will make some hardware tests and if all is good i will do another disassemble/teardown video from this.

Additionally I plan to make a video coverage of the Lenovo miix 2-8 with working modem too but this will take some days. stay tuned.

If there is someone out there who is interested in my miix maybe with the wires still connected to get usb devices working internal please feel free to contact me. For those who dont want wires I can dismantle everything too to bring it back to stock device.

Teaser

Here is a teaser but dont get disappointed i will present something really new…

Back @ Lenovo Miix… 5V source

After the last tests i realized that the DC-DC voltage regulator does not provide enough current for the Huawei E3331 USB modem. So today i decided to buy another voltage regulator which provides an output around 600mA @ 5V when there is an input with only 3.3V. I still hope that the sensor board will not switch off when the current rises the max. In this case i would have to go with the optional mod of the USB jack to get the whole device into OTG mode where i have several sources around on the board. I still did not get it managed to find out which transistor makes the source of 5V for the USB OTG, yet. But on the lower side of the board there are 3 of them around next to the usb board. I think the USB controller manages the voltage source and switch with the transistors through the different voltages. Hey trust me all these soldering points and modules are really really tiny on this mainboard. Only with this it is possible to build such slim and small devices but for reverse engineering and your eyes it is horror.

To go on I decided to buy a new tablet because my Miix is the last few weeks in this testing condition with cables around. But you will see soon one of the most coolest and high end devices on the market. But you can trust me it will be nothing from the “fruity company”.